TM400MSDSHOPG1

TM400MSD: SHOP GOAL SHEET

STARTER DRAW TEST

NAME___________________________________________DATE_________________

VEHICLE MAKE______________MODEL_________________YEAR____________

VIN (vehicle identification number)__________________________________________

NUMBER OF CYLINDERS_______________ENGINE TYPE___________________

MAXIMUM STARTER DRAW IN AMPS_____________________________________

MINIMUM VOLTAGE ACCEPTABLE WHILE TESTING STARTER____________

CHECK YOUR BATTERY BEFORE TESTING STARTER

IT MUST BE AT LEAST 12.0 VOLTS

BEFORE CRANKING STARTER !

CHECK WITH YOUR INSTRUCTOR OR "MITCHELL ON DEMAND"

TO DETERMINE THE PROPER WAY OF DISABLING THE VEHICLES

IGNITION SYSTEM SO THE CAR DOES NOT START WHILE TESTING.

STARTER DRAW TEST VALUES IN VOLTS

*TIME IN SECONDS*	*TEST 1*	*TEST 2*	*TEST 3*
*0 seconds*
5
10
15
20

FOR SAFETY!

Remember anytime your battery

VOLTAGE DROPS BELOW 7.0 VOLTS

STOP TESTING!!!

Recharge your battery

Before testing again!

YOU SHOULD PRINT THIS SHEET WHEN YOU ARE READY TO BEGIN TESTING YOUR STARTER **** YOU WILL NEED THE INFORMATION IN THE TABLE TO CALCULATE AND GRAPH YOUR RESULTS !!!

TO GRAPHING STARTER DRAW TEST INFO STARTDRW.XLS

BACK TO MAIN tcdauto.htm